Color Fill File (.cfl)

The color fill resource allows a great deal of tailoring of contour plots. The color fill values, colors and attributes especially for large lists can be cumbersome specified on the command line. Therefore, these resources can be specified in a color fill file. The parameters in this file are the same as those listed in the color_fill resource but the multiple parameters are listed on separate lines.

FORMAT

The syntax for each line is:

[value:]color[:attrib]
[value:]color[:attrib]
...

Where:

• value -- A contour value cutoff for the lower end of the contour range.
• color -- The color value (either number or name) or a range of color values (either numbers or names).
  The range is specified as follows:
  
  color-color
  
  This represents a contiguous range of numbers or of color names. For example, 2-4 gives colors 2,3,4. The values red-blue will give all the colors between red and blue in the color table. A value of off means no fills will be used (area is transparent). A color of end terminates the list.
• attrib -- Any of the color attributes like fill style, line width each separated by a colon listed below:
  

  Attribute	Description
  wi=width	Specifies the width of lines.  This includes lines used in text and markers. The default value is 1.0.
  st=style	Specifies the style of lines.  Possible values are: sol - solid lines (number 1) dsh - dashed lines (number 2) lsdsh - long short dashed lines (number 3) llsdsh - long, long, short dashed lines (number 4) dot - dotted lines (number 5) # - a number corresponding to the above styles
  fo=font	Specifies the font name.  See the font_list resource.
  fi=fill fp=fill	Specifies the fill pattern. Possible values are: sol - solid fill (number 0) st - stippled fill (number 1) ost - open stippled (number 2) rst - random stipple (number 3) lst - large stipple (number 4) vln or || - vertical lines (number 5) drl or // - diagonal lines moving to upper right (number 6) dlr or \\ - diagonal lines moving to lower right (number 7) hln or -- - horizontal lines (number 8) hat or XX - hatched lines (number 9) 0% - 0 % fill (number 10) 1% - 11% fill (number 11) 2% - 22% fill (number 12) 3% - 33% fill (number 13) 4% - 44% fill (number 14) 5% - 55% fill (number 15) 6% - 66% fill (number 16) 7% - 77% fill (number 17) 8% - 88% fill (number 18) 9% - 100 % fill (number 19) ## - a number associated with the above patterns
  sc=scale hi=height	Specifies the scale factor.  For text, this is the text height. For markers, this is the size of the marker. The default value is 1.0.
  te=expan	Specifies the text expansion factor. This controls how wide text is plotted. An expansion factor greater than 1 results in fat text. A value less than 1 results in thin text. The default value is 1.0.

EXAMPLES

For example:

0:white
10:red
30:blue
100:green

Specifies to contour white all areas running from values 0 to 10, red from 10 to 30, green from 30 to 100 and all values above 100 as green. The values less than 0 are not contoured.

0:white:st=2
10:red:wi=3
30:blue:fp=14:st=3
100:green:fp=16

For color fill contours, the attributes would use fill pattern 14 for the blue areas and fill pattern 16 for the green areas.

Here is a sample prec.cfl file:

.01:DDMagenta
.05:DMagenta
.1:MMagenta
.175:BMagenta
.25:Blue
.375:LBlue
.5:Green
.75:LGreen
1:Brown
1.5:Yellow
2:Red
3:Lred
4:LGray     

SEE ALSO